Added: 12/19/2005 |
Table Tennis Nets and Posts and How They Improve a Table?s DurabilityLet's start with table tennis nets review. The net should be fastened with bracing on distance of 15.25 cm from a lateral line of a table. The net should tower above a table on 15.25 cm. The top edge of the net is 15 mm in width and should be of white color. For game in pairs, each half of table should be divided into two equal half by white line in width of 3 mm. The nets can be made of various materials (cotton, nylon), the fixture is carried out by various ways: in a surface of a table or to a bearing design.
The hits against table tennis nets and posts are numerous. The tennis table should be rectangular, the width of 1.525 m, height 76 cm and the length 2.74 m. The tennis table should be in horizontal position. The surface of a table can be made of any material, but should be homogeneous. If a standard ball for table tennis is released from height of 30 cm above a table, it should jump aside on 26 cm. The surface of a table should be of matte, black or dark color. The edges of a tennis table (width 2 cm) should be of white color. The table should be divided into two equal half by vertically worth net.
The stock for game in table tennis is selected depending on a place of use (the room, open air) and a level of skill of players (professionals, amateurs). There are two pieces of updating for the tennis tables, distinguished by a material of a tabletop: for game on open-air (aluminum composite) and for rooms (wood particleboard). The material of table tennis nets and posts are the important characteristics of a tennis table. They determine the rebounds of balls. Certainly, for high-quality tennis tables the high-quality aluminum composite is used.
Choosing the table tennis nets and posts it is necessary to pay attention to the fact whether the table is with rollers for simplicity of transportation and break mechanisms for fixation of position is equipped during training. The majority of models of tables can easily develop saving a place at storage. In some models of table tennis nets and posts, it is possible to train independently.
The unique system of multilayered painting of a surface is used in all professional tables. The one layer is ultraviolet-protective. It serves for protection of a surface of a table against radiation and interferes with fading of a table and occurrence of patches of light during the game. The second layer is varnish. The third layer includes putty. The fourth layer is a first coat.
The table tennis post information is useful but you should never forget about rackets! The racket can have any size, form, weight but the basis should be flat and firm. Wood should make at least 85 % of thickness of the basis. The sticky layer within the limits of the basis can be fortified a fibrous material such as a carbonaceous fiber, fiberglass or the pressed paper.
However, it should not be thicker than 8 % of full thickness or 0.35 mm. The side of any racket, which is used for drawing impact on a ball, should be closed or pimply rubber with pimples outside and thickness no more than 2 mm with a layer of glue, or overlays such as employing a "sandwich" with a layer of glue.
Article comments:
No comments for this article yet. Post your comment now!
